Rockwell Automation Allen-Bradley 1609-PXBP Manual Del Usuario página 5

3. Install the rear tie brackets (screws included), as shown in the diagrams below.
UPS and One External Battery Pack
Secure tie
brackets
4. Connect the green/yellow ground wires (screws included), as shown in the diagrams below.
5. Connect the rear panel batteries as shown in the diagrams below.
6. Replace the top covers and secure with the screws removed in step 1.
UPS and Two External Battery Packs
Note: Tie brackets on
the center XLBP share
a common screw.
TVSS Ground Wire Connections
Rear Battery Connections
3