Cold Rinse (Only Tech-400 Model And Versions); Drainage Of The Machine - ASBER TECH Serie Manual De Instrucciones, Uso Y Mantenimiento

asberprofessional.com
At the end of the wash cycle, remove the basket and leave the dishes to dry naturally. Remove the
dishes from the basket with clean hands, taking care not to burn yourself as the dishes are extremely
hot.
6.1.6

Cold rinse (ONLY TECH-400 MODEL and VERSIONS).

The machine you have purchased has a cold rinse system so that once the tableware has been
washed, it can be cooled quickly ready for subsequent use. To activate the cold rinse, hold down the
cold rinse button for the required time. (See figure).
6.1.7

Drainage of the machine

ASBER glass washers have two types of drainage; gravity drainage or using a drainage pump, which
is optional. The drainage pipe must always be fitted on a siphon to prevent the return of odours.
6.1.7.1 Drainage by gravity.
To drain the machine in this way, just remove the overflow from the machine and it will drain naturally.
For reasons of safety, this method of drainage should only be used with the machine switched off.
6.1.7.2 Drainage using the drainage pump (optional).
The drainage using the drainage pump option is only available on request. To drain the machine using
this method, proceed as follows:
•
•
•
•
•
asberprofessional.com
48
Cold rinse Hold button down for required time.
Remove the overflow valve.
Leave the door open.
Press the drain button for 3 seconds.
Select drainage (short cycle button) → press 3 seconds
The drainage cycle will start automatically.
At the end of the cycle (approx. 160 s), the machine can be switched off.
To drain the machine with the drainage pump, the hose must be at a
height (max. 680 mm).
ENGLISH