Sony HT-S200F Manual De Instrucciones página 17

Ocultar thumbs Ver también para HT-S200F:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

1
Prepare two screws (not supplied)
that are suitable for the wall
mount holes on the rear of the Bar
Speaker.
More than 30 mm (1 3/16 in)
Hole on the rear of the Bar Speaker
2
Stick WALL MOUNT TEMPLATE
(supplied) on a wall.
Center of the TV
Adhesive tape,
etc.
1
Align TV CENTER LINE () of
WALL MOUNT TEMPLATE with the
center line of your TV.
2
Align TV BOTTOM LINE () of
WALL MOUNT TEMPLATE with the
bottom of your TV, then stick
WALL MOUNT TEMPLATE on a
wall by using a commercially
available adhesive tape, etc.
4 mm (3/16 in)
5 mm
(7/32 in)
10 mm
(13/32 in)
WALL MOUNT
TEMPLATE
3
Fasten the screws into the marks
() on SCREW LINE () of WALL
MOUNT TEMPLATE as in the
illustration below.
200 mm
(7 7/8 in)
Screws
5 mm to
6 mm
(3/16 in to
1/4 in)
4
Remove WALL MOUNT TEMPLATE.
5
Attach the cushion pads
(supplied) below the holes on the
rear of the Bar Speaker.
200 mm
(7 7/8 in)
Marks ()
Cushion
pad
17
US

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido