SEVERIN KS 9886 Instrucciones De Uso página 9

Vinoteca con regulación de la temperatura
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 30
Dear Customer,
Before using the appliance, the user should read the following instructions carefully.
Connection to the mains supply
The appliance should only be connected to an earthed socket installed in accordance with the
regulations. Make sure that the supply voltage corresponds with the voltage marked on the rating
label. This product complies with all binding CE labelling directives.
 Do not operate this unit by means of a transformer or, together with other electrical appliances,
by means of an extension cable.
 To prevent noise vibration, ensure that the power cord does not touch any part of the rear of the
unit (e.g. the heat-exchanger).
General information
This appliance is a compressor refrigerator with integral glass door designed for cooling and storing
wine only.
 Refrigeration appliances are classified into certain climate classes. Please refer to the product
data sheet for information on the classification for this unit.
 This appliance is intended for domestic or similar applications, such as
- in shops, offices and other similar working environments,
- in agricultural areas,
- by customers in hotels, motels etc. and similar establishments,
- in bed-and breakfast type environments.
 This appliance is not intended for commercial use, nor for use in the catering business or similar
wholesale environments.
 No responsibility is accepted if damage results from improper use, or if these instructions are not
complied with.
Important safety instructions
 To prevent the risk of personal injury or damage to the unit, it must only be transported while in
its original packaging. Two people are required for unpacking and installation.
 The cooling circuit in this appliance contains the refrigerant isobutane
(R600a), a natural gas with a high level of environmental compatibility,
which is nevertheless flammable. Ensure, therefore, that none of the
components of the refrigerant circuit become damaged during
transportation and installation of the appliance. If damage to the cooling
circuit does occur, do not switch on or connect the appliance to the mains
power. If there should be an open flame or any other source of ignition in the vicinity of the
refrigerant gas, make sure it is removed immediately from the area and that the room is then
thoroughly ventilated.
 Warning: Do not damage the cooling circuit. Any escaping refrigerant may cause damage to the
eyes.
 Warning: Keep ventilation openings, in the appliance enclosure or in a built-in structure, clear
of obstruction. Sufficient ventilation must be ensured at all times.
 Warning: Do no t use any external device (e.g. a heater or heating fan) to accelerate de-frosting;
Temperature-controlled wine cabinet
9

Publicidad

Tabla de contenido
loading

Tabla de contenido