Connecting The Usb Cable; Inserting The Batteries - Panasonic SC-MC07 Instrucciones De Funcionamiento

Power supply preparation
Please connect to a PC using the USB cable (supplied) or use batteries
(not supplied).

Connecting the USB cable

• Do not use any other USB cables except the supplied one. (Operation is not guaranteed.)
• Do not connect two or more USB devices to a PC. (Operation is not guaranteed.)

Inserting the batteries

Insert so the poles (i and j) match those in this unit.
LR6, AA (Alkaline)
(not supplied)
• Use alkaline batteries.
• If the battery is low, the indicator will change from blue to red.
Note
• Connection to a USB port of a PC provides the unit with the power supply only;
communication with the PC or charging of the unit does not work.
• USB is higher priority than battery, when this unit is connected to a PC and the battery is
inserted at the same time.
4
4
USB cable (supplied)
Pull the sheet to remove the batteries