Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Installation
!
CAUTION
!
WARNING
16
When using a cooler
The hot water can cause burns and damage wetted parts of
®
Testomat
808.
Water outlet
The feed water flows through the measuring chamber to the drain via
the outlet hose.
Remove the red plug from the outlet connection.
Connect the outlet connection of Testomat
(internal diameter 4 mm).
Feed the hose to an outlet.
Transportation plug!
The outlet is sealed with a plug to prevent leakage during transporta-
tion. Keep and store the plug for possible transportation at a later
date.
Connecting the power supply and devices
Risk of electric shocks during installation!
If the power supply is not disconnected prior to installation, it may
result in personal injuries, destruction of the product or damage to
plant parts.
Always disconnect the relevant plant parts before installing Tes-
®
tomat
808.
Only use tested cables with sufficient cross-sections for the con-
nections.
Disconnecting device for the power supply
The unit has no power switch!
®
Fit the Testomat
808 with a switch as a disconnecting device for
the power supply. Use an appliance switch or a circuit breaker that
meets the requirements of IEC 608947-1 and IEC 60947-3.
The switch must be within easy reach of the user of the Testomat
808 and clearly marked as a disconnecting device for the Tes-
tomat
®
808.
®
808 to an outlet hose
®
Publicidad
Tabla de contenido
