Installation; Operation; Cleaning; De-Installation - Heyl Testomat 808 Manual De Instrucciones

Dispositivo automático de análisis online para la dureza del agua
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Notes and instructions to be observed
!
WARNING
NOTE
8

Installation

• Always completely disconnect the relevant plant part before in-
stalling the instrument or connecting/disconnecting it to/from the
power supply. Secure the plant against reconnection.
• Only connect the instrument to the mains voltage specified on the
rating plate.
• Always observe technical data and ambient parameters.
• Testomat
®
808 requires an interference free and stable power
supply. If necessary, use a mains filter to protect Testomat
against interference voltages caused, e.g., by solenoid valves or
large motors. Never lay connecting cables parallel to power cables.

Operation

• Ensure that the maximum electrical load capacity of the relay out-
puts is never exceeded.
• Immediately switch off Testomat
malfunctioning occurs. The warranty will be void if you tamper with
or attempt to repair Testomat
authorised service staff.

Cleaning

• Only use a dry, lint-free cloth for cleaning.

De-installation

• Prior to de-installing a defective instrument, always write down a
description of the error (failure effect). It is only possible to repair a
defective instrument (irrespective of the warranty period) if it has
been de-installed and returned to us with a description of the error.
Use to the enclosed error log to describe the error and return it to
us together with the instrument. If the error log is no longer availa-
ble, download it at www.heyl.de.

Disposal

• Dispose of the instrument in accordance with national regulations.
®
808 and contact service staff if
®
808. Repairs must be carried out by
®

Publicidad

Tabla de contenido
loading

Tabla de contenido