Internal Design Testomat 808; Rear Of The Controller Board; Reset Key S1; Function Key S6 - Heyl Testomat 808 Manual De Instrucciones

Installation
S6
S7
18
Internal design Testomat

Rear of the controller board



Keys 1 to 4 are located at the front of the board. Please refer to the
section entitled "Functions of the operating and display elements"
page 11 for a detailed description of its operating system and the
display elements.
The following function keys and slide switches as well as plug con-
nectors are also provided:

Reset key S1


Use reset key S1
Testomat ® 808 after an update.

Function key S6

Use function key S6
ments. Please refer to the section entitled
33 for an overview of possible switching positions and interval paus-
es. (The standard setting is 3.)

Function key S7

Use function key S7
and 2. Please refer to the section entitled
2" on page 26 for an overview of possible switching po-
relays 1 and
sitions. (The standard setting is 3.)
®
808


to execute a reset, i.e. to reset the firmware of

to set the interval pause between measure-
"Interval pause"

to set the switching behaviour of the relays 1
"Switching functions of the


on
on page

