Optional Kits; Accessories; Packing And Unpacking; Setting To Work - Connection To The Power Supply - Nilfisk Alto ATTIX 110 Instrucciones De Manejo

ATTIX 110

Optional kits

Various optional kits are available for converting the
vacuum cleaner:
- level gauge for liquids suction/stop, removable
separator, lifting band and bracket, packing-into-
sack system, grid and valves.
On request, the vacuum cleaner can be supplied with
optional kits already installed. However, they can also
be installed at a later date.
Please contact the manufacturer's sales network for
further details.
Instructions to install parts on request are included in
the conversion kit.
DANGER !
Use only genuine optional kits supplied and
authorized by the manufacturer.

Accessories

Various accessories are available; refer to the
manufacturer's accessory catalogue.
DANGER !
Use only genuine accessories supplied and
authorized by the manufacturer.
GB

Packing and unpacking

See fig. 2.
Dispose of the packing materials in compliance with
the laws in force.
Model
A (mm)
B (mm)
C (mm)
(Kg)
Setting to work - connection to the power
supply
DANGER !
- Make sure that the vacuum cleaner is in
perfect condition before starting work.
- Before plugging the vacuum cleaner into the
electricity mains, make sure that the voltage
rating indicated on the data plate corresponds
to that of the electricity mains.
- Plug the vacuum cleaner into a socket with a
correctly installed ground contact/connection.
- Make sure that the vacuum cleaner is off.
- The plugs and connectors of the connection
cables must be protected against splashed
water.
- Make sure that connections to the electrical
mains and plug are correct.
- Use the vacuum cleaners only when the cables
that connect to the electrical mains are in
perfect condition (damaged cables could lead
to electric shocks).
- Regularly check that the electric cable does
not show signs of damage, excessive wear,
cracks or ageing..
-4-
ATTIX 110
800
700
,750
80