Wet And Dry Applications; Maintenance And Repairs - Nilfisk Alto ATTIX 110 Instrucciones De Manejo

ATTIX 110

Wet and dry applications

Note
The supplied filter must be correctly installed.
If the vacuum cleaner is used to vacuum liquids, make
sure that the liquid level sensor activates and operates
in the correct way.
DANGER !
Comply with the safety regulations governing the
materials for which the vacuum cleaner is used.
DANGER !
If the version for liquids is used:
- make sure that the liquid level sensor operates
correctly before vacuuming liquids.
- If foam forms, turn off the vacuum cleaner
immediately and empty the container.
- Warning: switch off the vacuum cleaner
immediately if foam or liquid leaks out.
- Regularly clean the liquid level limiting device
and check to make sure that there are no signs
of damage.
- Warning: the dirty liquid collected by
the vacuum cleaner must be considered
conductive.
GB

Maintenance and repairs

DANGER !
Disconnect the vacuum cleaner from its power
source before cleaning, servicing, replacing parts
or converting it to obtain another version/variant;
the plug must be removed from the socket.
DANGER !
- Carry out only the maintenance operations
described in this manual.
- Use only original spare parts.
- Do not modify the vacuum cleaner in any way.
Failure to comply with these instructions could
jeopardize your safety. Moreover, such action
would immediately void the EC declaration of
conformity issued with the vacuum cleaner.
DANGER !
To carry out maintenance operations that
are not described in this manual, contact the
manufacturer's Service Centre or his sales
network.
-6-