Fault Code - BOJ MC-2000 Manual De Uso

English
HOW TO USE THE BASIC FUNCTION:
You may set the working time, speed and temperature according your requirement. Please follow
the steps:
1. Set the working speed (1-10), the time (0-99minutes) and the temperature (30-120ºC).
Remarks:
1) If you set the working speed and time, or only set the working speed, the appliance
will work under mixing food status.
2) And if you set the working speed, time and temperature, the appliance will work
under mixing & heating status.
2. Click "Start/Stop" button, then the appliance starts to work and the timer is counting down.
(Remarks: If you don't set the working time, the timer of appliance will be count up.).
3. Sound "Beep" will be heard while the working time is left 2 seconds. At last, the appliance goes
back to stand-by state.
4. After use, turn the main appliance off. Remove the bowl from the main appliance, and take off
the bowl lid.
5. Take out the processed food from the bowl.
Caution:
1. Don't touch the metal part of the bowl while it is hot.
2. Only hold the handle of the bowl to move the bowl.
3. Never heat up the bowl when it is empty.
4. You may halfway change the working time (between 0-99minutes) and working speed (between
1-10) and working temperature (between 30-120ºC).

FAULT CODE

CODE
E1 "E1" was shown on LCD, meanwhile the
light color of "Start/Stop" button (L)
changes from green to red.
E2 "E2" was shown on LCD, meanwhile the
light color of "Start/Stop" button (L)
changes from green to red.
E3 "E3" was shown on LCD, meanwhile the
light color of "Start/Stop" button (L)
changes from green to red.
E4 "E4" was shown on LCD, meanwhile the
light color of "Start/Stop" button (L)
changes from green to red.
EXPLANATION
The appliance needs to be sent to the
approved service centre for repair.
Take out the bowl and reinstall it
according to the operating instruction. It
needs to be sent to the approved service
centre if it still doesn't work.
Take out the bowl, and reinstall it
according to the operating instruction. It
needs to be sent to the approved service
centre if it still doesn't work.
Firstly power off, and then restart the
appliance after 1 hour. It needs to be sent
to the approved service centre if it still
doesn't work.
- 10 -
SOLUTION