Sandscreening; Waxed Hardwood Floor Applications; Surface Cleaning And Waxing Hard Wood Floors; Tile Floor Applications - Oreck 550 Serie Manual De Uso

build-up of other floor cleaners. If necessary, repeat
procedure until floor shines.
See Timberworks bottle for complete instructions.
®

Sandscreening

(Wood Floors)
Sandscreening is ideal for refinishing the polyurethane
coating on hard wood floors. The procedure is not
designed to totally remove the old polyurethane, but
smooth out imperfections and prime the floor for a new
fresh coating. However, polyurethane coatings are
generally very durable and look good for a long time - try
a thorough cleaning before refinishing the polyurethane
coating to see if the luster can be restored.
Equipment and Material Required:
• Orbiter ® Multi-Floor Machine
• Black Drive Pad Holder
• Brown Strip Pad
• Sand Screen 60 grit
• Sand Screen 80 grit
• Sand Screen 100 grit
• Broom or Dust Mop
• Vacuum Cleaner
• Tack Rags
Procedure:
1. Use Orbiter ® Multi-Floor Machine and the brown
strip pad.
2. Place #60 grit sand screen disc under brown strip
pad. Sand the floor. Remove residue by vacuuming
or sweeping the floor in the same direction as the
boards.
3. Place a #80 sand screen disc under the brown strip
pad. Sand the floor.
4. Sweep and vacuum the floor, then tack rag
THOROUGHLY.
5. Apply finish according to manufacturer's
recommendations.
6. Burnish between coats with #100 grit sand screen
disc and tack rag.
Surface Cleaning and Waxing
Waxed Hard Wood Floors
Waxed Hard Wood Floor
Applications
This procedure should be used on WAX FINISH floors only.
Equipment and Material Required:
• Orbiter Multi-Floor Machine
®
• Black Drive Pad Holder
• Lamb's Wool Bonnet
• Tan Polish Brush (Union Mix)
• White Polish Pad (optional)
• Paste Wax, 1 lb.
• Indian Sand Paste Wax
• Dust Mop
• Buffable Wax
E N G L I
Procedure:
1. Completely dust mop floor.
2. Wipe up spills with a dry cloth or paper towel. Use a
3. To apply paste wax: Attach black drive pad holder to
Helpful Hints:
1. When floor looks dull, try buffing first to see if that
2. When areas of heavy use no longer respond to
3. Use clear paste wax to retain the floor's natural color.

Deep Cleaning

Equipment and Material Required:
• Orbiter
• Black Drive Pad Holder
• Orange Scrub Brush or Black Carpet Brush
• White Terrycloth Bonnet
• Grunge Attack
Procedure:
Grunge Attack
grease from tile floors and grout, leaving sparkling results.
1. Dilute Grunge Attack
2. Lightly spray a 6 ft by 6 ft area with diluted Grunge
3. Clean with the Orbiter
4. Repeat steps 1 through 3 until the whole floor has
5. Go back over the cleaned floor with the Orbiter
See Grunge Attack
instructions.
8
S H
slightly damp cloth for sticky spills. Hint: Buff with
white polish pad to restore luster.
Orbiter ® Multi-Floor Machine. Apply a tablespoon
of paste wax on 4 sections of white polish pad. Place
white polish pad on floor and center black drive pad
holder onto pad. Work Orbiter
in a forward/back motion and spread out the paste
wax to a thin coat. Allow paste wax to dry for
5 minutes. Turn white polish pad over to clean side
and buff. Use tan polish brush or lamb's wool bonnet
to obtain a higher luster.
will restore the luster before re-waxing.
buffing, wax only those areas and buff all of the floor
to an even luster.
Use Indian Sand Paste Wax to add a little color and
help blend in blemishes on old floors.

Tile Floor Applications

® Multi-Floor Machine
® Tile Floor Cleaner
® Tile Floor Cleaner lifts dirt, grime and
® Tile Floor Cleaner into a
separate spray bottle according to the instructions on
the bottle.
Attack ® Tile Floor Cleaner.
® Multi-Floor Machine and an
orange scrub brush for ceramic tile floors or
concrete. Use Orbiter ® Multi-Floor Machine and the
black carpet brush for delicate or glazed ceramic or
porcelain tile floors.
been cleaned.
Multi-Floor Machine and white terrycloth bonnet to
remove all dirt lifted by the orange scrub brush.
Wet floor as necessary with water or diluted
Grunge Attack ® Tile Floor Cleaner.
® Tile Floor Cleaner bottle for complete
® Multi-Floor Machine
®