Cleaning The Body Of The Air Purifier; Cleaning The Air Quality Sensor; Cleaning The Surface Of The Filter - Philips 800 Serie Manual Del Usuario

Cleaning the body of the air purifier

Regularly clean the inside and outside of the air purifier to prevent dust from
collecting�
1
Use a soft, dry cloth to clean both the interior and exterior of the air
purifier�
2
The air outlet can also be cleaned with a dry, soft cloth�

Cleaning the air quality sensor

Clean the air quality sensor every two months for optimal functioning of the
appliance�
Note:
• If the air purifier is used in a dusty environment, it may need to be cleaned
more often�
• If the humidity level in the room is very high, condensation may develop
on the air quality sensor and the air quality light may indicate a poorer air
quality even though the air quality is actually good� If this occurs, clean the
air quality sensor or use the air purifier on a manual speed setting�
1
Switch off the air purifier and unplug from the power socket�
2
Clean the inlet and outlet of the air quality sensor with a soft brush (fig j)�
3
Open the air quality sensor cover (fig k)�
4
Clean the air quality sensor, the dust inlet and the dust outlet with a damp
cotton swab (fig l)�
5
Dry all parts thoroughly with a dry cotton swab�
6
Reattach the air quality sensor cover (fig m)�

Cleaning the surface of the filter

Wipe the surface of the filter with soft wet cloth or clean the surface of the
filter with a vacuum cleaner (fig n)�
Note:
• if you use a high power/ industrial vacuum cleaner, it may damage the filter�
EN 7