Getting Started; Select The Display Language And Cancel The Demonstration; Set The Initial Settings; Set The Clock And Date - Kenwood KMM-BT305 Manual De Instrucciones

GETTING STARTED

1
Select the display language and cancel the
demonstration
When you turn on the power for the first time (or [FACTORY RESET] is set to
[YES]), the display shows: "SEL LANGUAGE"
1
Turn the volume knob to select [EN] (English), [RU] (Russian),
[SP] (Spanish) or [FR] (French), then press the knob.
[EN] is selected for the initial setup.
Then, the display shows: "CANCEL DEMO"
2
Press the volume knob again.
[YES] is selected for the initial setup.
3
Press the volume knob again.
"DEMO OFF" appears.
2

Set the clock and date

1
Press the volume knob to enter [FUNCTION].
2
Turn the volume knob to select [CLOCK], then press the knob.
To adjust the clock
3
Turn the volume knob to select [CLOCK ADJUST], then press the knob.
4 Turn the volume knob to make the settings, then press the knob.
Hour Minute
5
Turn the volume knob to select [CLOCK FORMAT], then press the knob.
6
Turn the volume knob to select [12H] or [24H], then press the knob.
To set the date
7 Turn the volume knob to select [DATE FORMAT], then press the knob.
8
Turn the volume knob to select [DD/MM/YY] or [MM/DD/YY], then press
the knob.
9
Turn the volume knob to select [DATE SET], then press the knob.
"PRESS" "VOLUME KNOB"
"PRESS" "VOLUME KNOB".
10 Turn the volume knob to make the settings, then press the knob.
Day Month Year or Month
11
Press and hold to exit.
To return to the previous setting item, press
3

Set the initial settings

1 Press B SRC repeatedly to enter STANDBY.
2
Press the volume knob to enter [FUNCTION].
3 Turn the volume knob to select an item (see the following table), then
press the knob.
4 Repeat step 3 until the desired item is selected or activated.
5
Press and hold to exit.
To return to the previous setting item, press
[SYSTEM]
[KEY BEEP] [ON]: Activates the keypress tone. ; [OFF]: Deactivates.
[FACTORY RESET] [YES]: Resets the settings to default (except the stored station). ;
[NO]: Cancels.
[CLOCK]
[CLOCK DISPLAY] [ON]: The clock time is shown on the display even when the unit is
turned off. ; [OFF]: Cancels.
[ENGLISH]
Select the display language for [FUNCTION] menu and music
[РУССКИЙ]
information if applicable.
[ESPANOL]
By default, [ENGLISH] is selected.
[FRANCAIS]
Day Year
.
.
Default: [XX]
5