Getting Started; Select The Display Language And Cancel The Demonstration; Set The Clock And Date - Kenwood DPX395MBT Manual De Instrucciones

Basics
To
Turn on the power
Adjust the volume
Select a source
Change the display information
4
ENGLISH
On the faceplate
Press B SRC.
• Press and hold to turn off the power.
Turn the volume knob.
• Press B SRC repeatedly.
• Press B SRC, then turn the volume
knob within 2 seconds.
Press DISP repeatedly. (Page 33)

Getting Started

1

Select the display language and cancel the demonstration

When you turn on the power for the first time (or [FACTORY RESET] is set to
[YES], see page 6), the display shows: "SEL LANGUAGE" "PRESS"
"VOLUME KNOB"
1
Turn the volume knob to select [ENG] (English) / [SPA] (Spanish) /
[FRE] (French), then press the knob.
[ENG] is selected for the initial setup.
Then, the display shows: "CANCEL DEMO" "PRESS" "VOLUME KNOB".
3 Press the volume knob again.
[YES] is selected for the initial setup.
4
Press the volume knob again.
"DEMO OFF" appears.
2

Set the clock and date

1
Press the volume knob to enter [FUNCTION].
2
Turn the volume knob to select [CLOCK], then press the knob.