Routine Care And Maintenance; Cleaning And Storage - InMotion X1 Serie Manual De Usuario

5

5.1. Cleaning and Storage


Clean your Hovershoes usually to maintain optimal performance.

You can wipe the bodies of Hovershoes with a soft cloth dampened with a small amount of water.

A household shower head or a horticultural sprinkler (with a water pressure below 1MPa or 145PSI) may be used to
flush the tires and the bottom. After flushing is completed, it is necessary to drain the water droplets as soon as
possible and dry the Hovershoes in a ventilated place to avoid corrosion of certain steel parts.

During cleaning, make sure that the Hovershoes are turned off and the charging cable has been unplugged and the
charging port's rubber cap buckled. Otherwise, it may cause electric shock or serious malfunction.

It is strictly forbidden to wash the Hovershoes directly with a high-pressure water cannon for vehicle cleaning or soak
the whole machine with water. It may lead to accumulation of water vapor or water in the body, thus causing serious
irreparable faults.

Do not use gasoline, kerosene, acetone or other corrosive and volatile chemical solvents to clean the bodies. These
substances may damage the appearance and internal structure of Hovershoes.

When not in use, try to store indoors in a dry and cool place. Try to avoid storing the Hovershoes outdoors for a long
time. Sun exposure and extremely hot/cold outdoor environments can accelerate the appearance aging of
Hovershoes.

Routine Care and Maintenance

34