Virax VULCA D160 Manual De Instrucciones página 15

12 Secure the work piece. Use clamps or a vice to hold the work piece firmly. They will hold
it more securely than your hand can.
13 Avoid abnormal postures. Make sure to stand securely and always keep your balance.
14 Maintain your tools with care. For better and safer work, keep cutting tools sharp and
clean. Follow the instructions for lubrication and changing tools. Regularly inspect the
electric tool's connection cable, and if it is damaged, have it replaced by an authorized
expert. Regularly check extension cords, and replace them if they are damaged. Keep the
handles dry, clean and free of oil and grease.
15 Pull the plug from the socket. When not using the electric tool, before maintenance or
when changing tools, such as saw blades, drills and cutting bits.
16 Do not leave any tool keys inserted. Before switching on, check to see that keys and
adjustment tools have been removed.
17 Avoid unintentional activation. When plugging the tool in, make sure that the switch is
turned off.
18 Use outdoor extension cords. When outdoors, use only extension cords that are
approved and appropriately marked.
19 Be alert. Pay attention to what you do. Approach your work sensibly. Do not use the
electric tool when you are distracted.
20 Check the electric tool for damage. Before using the electric tool, you must inspect
safety equipment or slightly damaged parts carefully to ensure that they work properly and
as intended. Check to see that the moving parts operate freely and don't stick, and to
make sure no parts are damaged. All parts must be mounted properly and meet all the
conditions for ensuring trouble-free operation of the electric tool.
Damaged safety equipment and parts must be properly repaired or replaced by a
professional facility, unless otherwise indicated in the user manual. Damaged switches
must be replaced by a customer service facility.
Never use an electric tool whose switch cannot be turned on and off.
21 Caution. Using other insertion tools and accessories may cause injury.
22 Have your tool repaired by an electrical expert. This electric tool meets applicable
safety requirements. Repairs must be made only by an electrical expert using original
replacement parts. Otherwise accidents many occur.
15