How To Order; Checklist - Bulldog HW Serie Manual De Instrucciones

3.3 Lubrication
All moving parts in the winch are permanently lubricated at the time of assembly. Under normal con-
ditions factory lubrication will suffice. If re-lubrication of gear box is necessary after repair or disas-
sembly use Shell EP2 or equivalent grease. Regularly lubricate Clutch T-handle with light oil. Never
lubricate the brake system.
3.4 How To Order Replacement Parts
Use only Cequent Performance Products' parts or parts of equal quality for repair. Replacement
parts are available through Cequent Performance Products' Tech Service Department,
1-800-521-0510. Please specify product model number.
Read, understand and follow the warnings
and instructions in this manual.
Check all fasteners and verify they are at the
proper torque. Replace fasteners as needed.
If damaged, discontinue use and replace
rope immediately.
Keep winch, rope, and switch control free
from contaminants. Use a clean rag or towel
to remove any dirt and debris.
To prevent SERIOUS INJURY, DEATH and PROPERTY DAMAGE, you should read, understand
and follow the warnings and instructions in this manual.
For assistance with this product or to order replacement parts, please contact:
CEQUENT
Maintenance

Checklist

Table 5 - Checklist
Cequent Performance Products, Inc.
47912 Halyard Dr. Suite 100
Plymouth, MI 48170
1-800-521-0510
http://www.cequentgroup.com/
PERFORMANCE PRODUCTS, INC. •
™
Before After
First EVERY
Operation Use
X
X
X X
X
F3840-00 REV A (3618) 12/14
Every
90 Days
X
X
15