OHAUS Aviator 2000 Serie Manual De Instrucciones página 4

EN-2
3 OPERATION
3.1 Controls
Button Functions
On Turns scale on when off
Off
Turns the scale off when on
Sets display to zero, →0← will be displayed
Zero
M+ Accumulates the weight or displays the accumulated information at 0 load.
Tare Enter / clear a Tare value, NET will be displayed
Key 0-9 Input digit. If no operation for 3 seconds, pressing these keys can clear the
current digit and input a new digit.
. Input decimal of the unit price
C Clears the unit price or amount
1) During weighing, press this key to add an amount. The "add-on" symbol
M+
appears, Weight reading display window shows "-Add-"; Unit price
display window shows add-on times; Amount display window shows total
amount. If amount is zero, this key is not applicable. Press any digit key
to exit current add-on operation (the add-on result will be memorized)
and return to weighing mode.
2) If no weighing, press this key to see the add-on amount. Weight reading
display window shows "tot"; Unit price display window shows total add-
on times; Amount display window shows total amount. Press any digit
key to exit current add-on operation (the add-on result will be
memorized) and return to weighing mode.
MC Clear memorized add-on result.
Exits add-on mode, add-on symbol disappears.
Change 1) Activate money change function. Weight reading display window shows
"-CHA-"; Amount display window shows
"------". Press digit keys to input the amount of received money (press [C]
to clear input), and amount display window will show the amount of
change. Press [Change] key again to exit change function and back to
weighing mode.
2) Unit switch: Under weighing mode, press this button for 3 seconds. The
scale will beep, meaning unit conversion is activated. LCD shows the
current weight unit.
Light
Turn on/off LCD backlight
M1 – M4
Displays pre-set unit price
Aviator™ 2000 Series
TABLE 3-1