DJ-Tech X10 Manual De Instrucciones página 4

2. For using with computer DJ software. Please install the Audio Driver for X10. The driver can be found in the
included Deckadance LE Setup CD (CD-ROM Drive:\Drivers\X10\). Please choose and install the driver that fits
your operating system, including Windows XP/Vista/7 (32-Bit or 64-Bit) and Mac OSX. Follow the on-screen
instructions to finish the setup.
Please refer to www.djtechpro.com
3. X10 can be used in different kind of set-ups apart from stand-alone DJ Mixer purpose. Below are 2 connection
examples of working with computer DJ Software.
Example 1: Work with DJ Software and MIDI controllers
Computer
Example 2: Work with DVS system
Computer
4. Audio setting: The built-in audio interface of X10 is a 4-in 4-out audio interface. The 4 outputs (2 x Stereo) are
routed to the PC1/ PC2 inputs. Set the Input Selector Switches to PC1/ PC2 to use the audio from computer. The 4
inputs (2 x Stereo) are routed from LN1/PH1 and LN2/PH2. Audio source connected to LN1/PH1 and LN2/PH2 will
be send to the computer.
Example 1: Traktor Pro
for latest driver update.
USB
USB
USB MIDI Controller X10
USB
LN/PH IN
Turntable X10
4
Master
USB
USB MIDI Controller
Master
LN/PH IN
Turntable
A. Open Preferences and select Audio Setup
B. Select DJ-TECH X10 as Audio Device
C. Select Output Routing
D. Select External for Mixing Mode
E. Select Out 1 and Out 2 for Channel A, Out
3 and Out 4 for Channel B
F. Select Input Routing
G. Select In 1 and In 2 for Channel A, In 3 and
In 4 for Channel B
Note: Since the Time Code function of Traktor
Scratch Pro requires the Audio Interface from
Native Instruments. The above setting is for
inputs works for audio thru only.
Speakers
Speakers