Lamborghini Caloreclima EM 3-E Manual Para La Instalación Y El Mantenimiento página 38

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

GAS VALVE ADJUSTMENT MULTIBLOC GB-E 055 / MBC-65-DLE
ADJUSTING START-UP GAS DELIVERY
Connect the pressure gauge to the pressure connector nipples at inlet 4
and outlet 3. Loosen the regulator by turning the main gas adjuster screw 2
anti-clockwise (when the regulator is loosened you will hear a click as you
turn the adjustment screw).
Start up the gas unit. Adjust start-up gas delivery via the start-up gas adjust-
ment screw 1. Turning clockwise increases delivery. Turning anti-clockwise
decreases delivery.
ADJUSTING MAIN GAS DELIVERY
Connect the pressure gauge to the pressure connector nipples at inlet 4 and
outlet 3. Start up the gas unit. Burner delivery must be adjusted by means
of the main gas adjustment screw 2. Turning clockwise increases delivery.
Turning anti-clockwise decreases delivery.
CHECKING THE QUANTITY OF GAS AT IGNITION
To check the quantity of gas at ignition, apply the following formula:
Ts x Qs ≤ 100
where
Ts = Safety time in seconds
Qs = Energy freed in safety time expressed in kW
The Qs value is obtained from:
where
Q1
= delivery expressed in liters freed in no. 10 startups in safety time.
Ts1
= total safety time of 10 startups
Qn
= Rated output
To obtain Q1, proceed as follows:
- Detach the lead from the control electrode (ionization electrode).
- Read the gas meter before the test.
- Perform 10 burner startups; these correspond to 10 safety lock-outs. Read the gas meter again; by subtracting the first
reading, the Q1 value is obtained.
Example:
First reading
Final reading
total Q1
- By performing these operations, we can find Ts1 by timing no. 1 startup (safety lock-outs) by the no. of startups.
Example:
Actual safety time = 1"95
- If, at the end of this checkup, the value is above 100, regulate the opening speed of the main valve.
00006,682 liters
00006,947 liters
00000,265 liters
Ts1
= 1"95 x 10 = 19"5
3
1
1 Start-up gas adjustment
2 Main gas adjustment
3 Pressure connector at outlet
4 Pressure connector at inlet
- 38
-
MBC-65-DLE
GB-E 055
2
3
1
4
4
GAS INLET
GAS INLET
2

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Em 6-eEm 9-e

Tabla de contenido