Range Selector - Alnor Velometer 6000 Serie Manual De Uso

4

Range Selector

The Range Selector (A) allows you to switch to one of two velocity
ranges or a static pressure range by means of a switch plate (B).
A switch button (C) is provided for changing the Velometer from use
with a Pitot Probe to use with either a Diffuser Probe or a Static Pressure
Probe.
When using the Pitot Probe, turn this button and allow it to spring out;
when using either the Diffuser Probe or a Static Pressure Probe, push the
button in and turn to lock it in position. In this position the switch button
slot must be vertical (aligned with arrows on label) for proper instrument
operation.
Do not block switch button during operation.
A Range
Selector
C Switch Button
E Port Connections
The plug-in port (D) accepts the various probes and allows you to rotate
them 360°. (+) and (–) ports (E) are for hose connections to the meter.
Your set will include two Range Selectors that are identified by red or
black lettering. This color coding relates to the same colored scales on
the meter.
D Plug-in Port
B Switch Plate
F Take-up
Adjustment
Screw