Sony WX-920BT Manual De Instrucciones página 28

USB NO MUSIC: There is no playable file.
 Connect a USB device containing playable files
(page 22).
USB NO SUPPORT: The USB device is not
supported.
 For details on the compatibility of your USB
device, visit the support site on the back cover.
USB OVERLOAD: The USB device is overloaded.
 Disconnect the USB device, then press SRC to
select another source.
 The USB device has a fault, or an unsupported
device is connected.
For RDS operation:
NO AF: No alternative frequencies.
 Press / (SEEK –/+) while the program
service name is flashing. The unit starts searching
for another frequency with the same PI (program
identification) data ([PI SEEK] appears).
NO PI: No program identification. The selected
station has no PI (program identification) data.
 Select another station.
NO TP: No traffic programs.
 The unit will continue searching for available TP
stations.
For BLUETOOTH function:
BT AUDIO NO DEVICE: The BLUETOOTH device is
not connected or recognized.
 Make sure the BLUETOOTH device is securely
connected, or the BLUETOOTH connection is
established with the BLUETOOTH device.
FILE ERROR: The selected operation could not be
performed.
 Wait for a while, then try again.
NO SUPPORT: The selected operation is not
allowed or supported.
 Make sure the BLUETOOTH device is supporting
HFP (Handsfree Profile).
UNKNOWN: A name or phone number cannot be
displayed.
WITHHELD: The phone number is hidden by the
caller.
28
GB
For Sony | Music Center operation:
APP -----------: A connection with the application is
not established.
 Make the "Sony | Music Center" connection again
(page 15).
APP DISPLAY: A screen setting display of the
application is open.
 Exit the screen setting display of the application
to enable button operation.
APP LIST: The contents list of the CD/USB/iPod is
open.
 Exit the list of the application to enable button
operation.
APP MENU: A setting display of the application is
open.
 Exit the setting display of the application to
enable button operation.
APP NO DEVICE: The device with the application
installed is not connected or recognized.
 Make the BLUETOOTH connection and establish
the "Sony | Music Center" connection again
(page 15).
APP SOUND: A sound setting display of the
application is open.
 Exit the sound setting display of the application
to enable button operation.
OPEN SONY APP: The "Sony | Music Center"
application is not running.
 Launch the application.
SONY APP DISCNCTED: The application is
disconnected.
 Make the "Sony | Music Center" connection
(page 15).
For steering wheel remote control
operation:
ERROR: An error occurred during the function
registration.
 Register again from the function where the error
occurred (page 18).
TIMEOUT: The function registration failed due to a
timeout.
 Try completing the registration while [REGISTER]
is blinking (about 6 seconds) (page 18).