Celsius/°Fahrenheit Setting; Standby Mode; Memory Mode - Little Journey KFT 509 Manual Del Usuario

Basic functions
°Celsius/°Fahrenheit setting
1. Push any button to switch to standby mode.
2. Hold the memory button (M)
approx. 2 seconds until the temperature mea-
surement/indicator switches from °C (degrees
Celsius) to °F (degrees Fahrenheit).
The switch from °C to °F is confirmed by 1 short
signal tone.
3. Proceed in the same way for vice-versa: from °F
(degrees Fahrenheit) to °C (degrees Celsius).
The switch from °F to °C is confirmed by 2 short
signal tones.

Standby mode

In standby mode, the room temperature indicator
9
( ) will be shown on the LCD display

Memory mode

The thermometer saves the last 9 body tempera-
ture measurements. The current measurement will
appear last in the memory. If all 9 memory slots are
occupied, the oldest measurement will be deleted
from the memory.
1. In standby mode, push the memory button
5
(M)
The memory indicator (
20
.
5
down for
7
) and the number
3
.