Cleaning The Condenser - Beko DCY 8202 GB5 Manual Del Usuario

Maintenance and cleaning
A
Never use solvents, cleaning agents or
similar substances for cleaning due to the
risk of fire and explosion!
6.3 Draining the water tank
Dampness of the laundry is removed and condensed
during drying process and the water that arise
accumulates in the water tank. Drain the water tank
after each drying cycle.
A
Condensed water is not drinkable!
A
Never remove the water tank when the
program is running!
If you forget to drain the water tank, the machine will
stop during the subsequent drying cycles when the
water tank is full and the Water Tank warning symbol
will flash. If this is the case, drain the water tank and
press Start / Pause button to resume the drying cycle.
To drain the water tank:
Pull the drawer and remove the water tank carefully.
Dryer / User Manual
• Drain the water in the tank.
• If there is lint accumulation in the funnel of the
water tank, clean it under running water.
• Place the water tank into its seat.
C
If the direct water draining is used as
an option, there is no need to empty the
water tank.

6.4 Cleaning the condenser;

Hot and humid air in the condenser is cooled with the
cold air from the room. Thus, the humid air circulating in
your dryer is condensed and then pumped into the tank.
C
Clean the condenser after every 30 drying
cycles or once a month.
To clean the condenser:
1. If a drying process has been carried out, open the
door of the machine and wait until it cools down.
2. Unlock the 2 condenser locks after opening the kick
plate.
23 / 52 EN