Disposal; Technical Specifications; Warranty And Service - Beurer IL 50 Manual De Instrucciones

NOTICE:
• Protect the unit or the parts from strong impacts
such as dropping the unit on the floor.
• Store the device and accessories in a location pro-
tected against environmental influences, i.e. in a
safe and dry location. Do not expose the device
and accessories to direct sunlight, extreme hot or
cold temperatures or humidity (e.g. in the bath-
room).
• Protect the unit against dust, dirt and moisture.
This may damage the device.
Remove the plug from the wall outlet and let the
unit cool down completely before you move it or
pack it away.
If possible, store the infrared heat lamp in its original
packaging in a dry place.

10. Disposal

NOTICE:
• Dispose of the device, components and optional
accessories according to applicable local regula-
tions. Unlawful disposal may cause environmen-
tal pollution.
In the interests of environmental protection the infrared
lamp should not be discarded with household garbage
at the end of its service life. Dispose of the unit at a
suitable local collection or recycling point.
Follow the local regulations for disposal of materials.
Dispose of the unit in accordance with the local Di-
rective for waste electrical and electronic equipment.
If you have any questions, please contact the local au-
thorities responsible for waste disposal.
This equipment complies with European and US Stan-
dards EN 60601-1-2 and is subject to specific safety
provisions for electromagnetic compatibility. Please
note, however, that portable and mobile HF commu-
nication equipment may influence this unit. Further de-
tails may be obtained from our Customer Service De-
partment.

11. Technical specifications

Voltage AC 110 V – 120 V / 60 Hz
Power
300 W
consumption
Timer Adjustable from 1 to 15 minutes in
one-minute steps.
Dimensions 10.6" x 11.2" x 7.7"
(W x H x D) (270 x 285 x 195 mm)
Weight Approx. 3.5 lbs (1,6 kg)
Operating Temperature: 50 – 95°F
conditions (10°C to 35°C)
Relative humidity: ≤ 90%
Storage and Temperature: 14 – 122°F
transport (-10°C to 50°C)
Relative humidity: ≤ 90%
Protection class II
Radiation max. radiation intensity at a dis-
intensity tance of 11,8" (30cm) and wave-
length range of 500nm to 1700nm:
225mW/sq m/nm
IR type A + B
We retain the right to make technical modifications to
improve and further develop the product. For manufac-
turing reasons, the color of the glass may change dur-
ing operation but this does not affect the performance
or quality of the unit.
Note:
If the device is used outside of the specifications, prop-
er function is no longer guaranteed! We reserve the
right to make technical changes to improve and further
develop the product.
Note:
This device and its accessories comply with US stan-
dards and are subject to special safety measures in
terms of electromagnetic tolerance. Note that portable
and mobile RF communication equipment can affect
this device. For detailed information, contact customer
service at the address provided.
ELECTROMAGNETIC COMPATIBILITY
• The device complies with current specifications with
regard to electromagnetic compatibility and is suit-
able for use in all premises, including those desig-
nated for private residential purposes. The radio fre-
quency emissions of the device are extremely low
and in all probability do not cause any interference
with other devices in the proximity.
• It is recommended that you do not place the device
on top of or close to other electronic devices. Should
you notice any interference with other electrical de-
vices, move the device or connect it to a different
socket.
• Radio equipment and TV interference may affect the
operation of this device.

12. Warranty and Service

Limited Lifetime Warranty For Original
Purchaser
Your Beurer Infrared heat lamp, Model IL 50, excluding
all enclosed accessories as these require routine main-
tenance, is warranted to be free from defects in materi-
9