Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATION
Timer
Timer function makes cooking easier by making it possible to set Duration. It can also be used
as a Kitchen Timer. You can activate the Timer function only when cooking (when heat setting
is greater than "0"). You can use the Timer function on all cooking zones at the same time.
Maximum time is 99 minutes (1 minute step).
To set the timer:
•
Place the cookware on the desired cooking zone.
•
When cookware is auto detected, set the heat setting
•
Select the cooking zone for which you want to set the timer.
•
To activate the timer touch and hold
You will be setting the second digit first (single minutes), and then the first digit (tens
i
of minutes).
•
When you activate the Timer, slide your finger across the
minutes.
•
Touch the timer sensor again to set the tens of minutes.
•
Slide your finger across the
•
If you do not set tens of minutes within 10 seconds, Timer will be set to "0" (for example
"06" which means the Timer is set to 6 minutes).
The Timer will start when the indicator light for the selected cooking zone starts flashing (indi-
cator light on the control panel figure 5).
To set the Timer for the next cooking zone, follow the above steps by selecting a different coo-
king zone. Keep in mind that the Timer function can be set for each cooking zone.
If more than one timer is set the shortest duration is displayed. This is indicated by a
i
flashing indicator light next to the Timer display.
52
until you hear a beep. The display will show "00."
sensor to set the tens of minutes.
sensor to set the single
Publicidad
Capítulos
Tabla de contenido
