If your heater fails to operate, please follow these instructions:
• Ensure that your circuit breaker or fuse is working properly.
• Be sure the heater is plugged in and that the electrical outlet is
working properly.
• Check for any obstuction. If you find any obstruction, turn the heater
"OFF".
Unplug the heater and wait a few minutes for it to cool down. Carefully
remove the obstruction. Plug the heater in and turn it on again by
referring to the OPERATING INSTRUCTIONS.
Cleaning and Storage:
It is recommended that the heater be cleaned at least one time during
the operating season in order to provide the optimum level of
performance.
ALWAYS TURN THE POWER SWITCH OFF AND UNPLUG THE HEATER
BEFORE CLEANING.
Be sure to save the box for off-season storage.
• Turn the heater "OFF", unplug it and wait for the heater to cool down.
• Use a dry cloth to clean only external surfaces of the heater.
• Do not use any cleaning agents or detergents.
• Never immerse the heater in water.
• Pack the heater in the original carton and store it in a cool and
dry place.
8
Troubleshooting