Step 2 - Door Reversing - Haier HC32TW10SB Manual Del Usuario

INSTALLATION REQUIREMENTS

STEP 2 - DOOR REVERSING

WARNING
to follow these instructions, leaving off parts, or overtightening screws,
can lead to the door falling off and result in injury and property damage.
If you want the refrigerator door to open from the opposite side, you can
reverse the door swing.
Hinge and
Cover
1. Ensure the unit is unplugged before starting door reversal.
2. Remove the 2 plug buttons on the left side on top of the cabinet.
3. Remove the plastic hinge cover by prying from the back
and pulling forward.
4. Remove the 2 screws from the top hinge.
5. Lift the freezer door up and off the center hinge (right
side). Set the freezer door on a nonscratching surface
with the outside up.
6. Open the fresh food door and remove the center hinge
by removing the 2 screws. Lift the hinge to remove.
7. Lift the fresh food door off of the bottom hinge. Set the
fresh food door on a non-scratching surface with the
outside up.
8. Lay the refrigerator on its back to access the bottom hinge.
10
(Optional)
Follow all steps when reversing the door swing. Failure
Plug
Buttons
Plug
Buttons
Center
Hinge
Turn
Bottom
Hinge
Hinge
Pin
Turn
Center
Hinge
Hinge
Pin
Bottom
Hinge
Hinge and
Cover
49-60808-1