Craftsman 536.881113 Manual De Usuario página 9

NOTE: If the cables have become dis-
connected, connect cables as shown in
Figure 7.
Traction Drive Cable Auger Drive Cable
REMOTE CHUTE KNOB
Figure 7
1. Assemble the remote chute knob
onto the lever until snug against the
nut (see Figure 8).
2. Make sure lip on the remote chute
knob is pointed toward the engine.
3. Tighten the nut against the bottom
of the remote chute knob.
Lip
Remote
Chute
Knob
Lever
Figure 8
SPEED SELECT KNOB
Install the speed select knob to the
speed select lever. See Figure 9.
Speed Select
Knob
Speed Select
Lever
Figure 9
F-021050L 9