Display/Touch Button Functions - Princess Smart Glass Panel Heater 01.341500.01.001 Manual De Usuario

Instruction manual

DISPLAY/TOUCH BUTTON FUNCTIONS

1
2
3
4
6
USE
•
•
5
•
•
6
•
7
•
•
•
1 Display
2 Temperature "+" button
3 Temperature "–" button
4 Power button
5 Mode button
6 Timer button
7 Child lock button
Push the On/Off switch on the side of the heater to turn the heater
on.
Press the power touch button to set the functions. The display will
show what function is active.
Use the mode button to adjust to low or high power. The upper
symbol on the display is for high power, the lower one indicates
the low power setting.
Press 'temperature up (+)' or 'temperature down (-)' buttons to
regulate the temperature you desired. The temperature can be
set between 15°C and 35°C.
Press the timer button to select the desired range between 1 hour
to 24 hours. The set time will disappear after a few seconds.
To enable the child lock HOLD down the lock button for 5
seconds and the lock symbol will appear on the display.
To disable the child lock HOLD the lock button again for 5
seconds and the lock symbol will disappear.
The child lock can be overridden by unplugging the heater or by
switching it off using the main ON/OFF switch on the side of the
device.