LD Systems MAUI G2 Manual De Usuario página 5

Installation kit with tilt and swivel mechanism for wall mounting the MAUI 11 G2 and MAUI 28 G2 speaker columns
LDMG2IK2 (black)
LDMG2IK2W (white)
1. Adapter for connecting to the speaker column (with speakON-compatible connection and terminal block connections)
2. Adapter for connecting to the MAUI G2 subwoofer (with speakON-compatible connection and terminal block connections)
3. Tilt and swivel bracket for vertical wall mounting
4. Mounting bracket for attaching to the speakers column (the mounting rail is greyed out in the picture. It is included for logistical reasons,
but is not required for this type of installation)
(1 x set of screws for attaching the hanging bracket to the speaker column and the tilt and swivel bracket to the hanging bracket included.
Tools required: 3 mm and 4 mm Allen keys or internal hex socket)
Floor stand kit for MAUI 11 G2 and MAUI 28 G2 speaker columns
LDMG2SPS (black)
LDMG2SPSW (white)
1. Adapter for connecting to the speaker column (with speakON-compatible connection and terminal block connections)
2. Adapter for connecting to the MAUI G2 subwoofer (with speakON-compatible connection and terminal block connections)
3. Cast iron base for attaching to the rod attachment or the column adapter
4. Rod attachment (height 55 cm) with M20 threaded bolt at the upper end and M20 thread at the lower end
5. M20 bolt for connecting the rod attachment or the column adapter to the cast iron base
6. 4-wire connection cable with speakON-compatible connectors
(tools required: large flat screwdriver, 3 mm Allen key or hex socket)
2
1
4
3
2
3
4
2
1
4
3
5
1
6
5