SEVERIN SM 9494 Instrucciones De Uso página 11

the required length before use.
Operation
∙ We recommend using milk with a high
protein content. For best results, the
milk should be taken from the refrigerator
immediately before frothing.
∙ Always ensure that the contact surface
between the base and the milk container
is clean and dry.
Preparing the stirring insert
∙ For frothing milk, use the stirring insert
with coil.
∙ For simply heating milk, use the stirring
head without coil.
Fill amounts
∙ For frothing, fi ll the container to a
maximum of 100 ml (lower max mark)
.
∙ For heating, fi ll the container to a
maximum of 200 ml (upper max mark)
.
Heating and frothing milk
∙ Unwind the cord to the required length
and connect the appliance to the mains.
∙ Place the container onto the base.
∙ Remove the lid from the milk container.
∙ Fit the 'Frothing' stirring insert (with coil)
onto the protrusion in the bottom of the
container, pushing it fi rmly down to lock it
in place.
∙ Put the required amount of milk into the
container.
∙ Place the lid on the container.
∙ Press the On/Off switch once if you want
to heat up milk.
∙ The indicator light shows blue, and the
appliance begins to heat up and froth the
milk.
∙ Once the milk is suffi ciently frothed,
the stirring and heating processes stop
automatically, and the indicator light
shows red.
∙ You can now remove the milk container
from the base.
∙ Pour out the milk, or use a suitable spoon
to take off the milk froth.
∙ Detach the power cord from the wall
socket after use.
Cold-frothing milk
∙ Proceed as described in the section
'Heating and frothing milk', but press the
On/Off switch three times in succession.
∙ The indicator lamp starts fl ashing blue
and the appliance starts cold-frothing the
milk.
∙ Once the milk is suffi ciently frothed,
the heating and stirring process stops
automatically and the indicator light
shows red.
∙ You can now remove the milk container
from the base.
∙ Pour out the milk, or use a suitable spoon
to take off the milk froth..
∙ Disconnect the appliance from the mains
after use.
Heating up milk
∙ Proceed as described in the section
'Heating and frothing milk', using the
'Heating' stirring insert.
∙ Press the ON/Off switch twice in
succession.
∙ The indicator lamp lights up blue and the
appliance starts heating the milk.
∙ Once the milk is suffi ciently heated,
the stirring and heating process stops
automatically and the indicator light
11