Appliance Maintenance And Ordering Spare Parts - SEVERIN SC 7148 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 43
SC 7148.book Seite 20 Dienstag, 7. März 2017 1:29 13

Appliance maintenance and ordering spare parts

Filling the fresh water tank
Fill the fresh water tank with cold tap water or warm water with a temperature of a maximum of
50 °C. Cleaning agents which do not foam, can be added. Do not exceed the maximum filling quan-
tity of 550 ml in the process.
NOTE:
Change the water in the fresh water tank after a longer period without using the appliance.
For further information, see also illustrated Quick Start Guide.
Emptying and cleaning the dirty water tank
7
Appliance maintenance and ordering spare parts
It is best to empty and clean the dirty water tank after each cleaning process.
1. Make sure that the appliance is switched off and is not on charge.
2. Remove the dirty water tank from the appliance.
3. Release and empty the dirty water tank.
4. Wash out the dirty water tank with clean water.
For further information, see also illustrated Quick Start Guide.
Cleaning the brushes and brush cover
Clean the brushes and the brush cover regularly.
1. Make sure that the appliance is switched off and is not on charge.
2. Remove the brush cover.
3. Release and remove the brush.
4. Clean the brush cover and brush with clean water.
For further information, see also illustrated Quick Start Guide.
Removing the handle
In order, for instance, to send the appliance to our customer service department, remove the handle.
1. Make sure that the appliance is switched off and is not on charge.
2. Remove the middle screw from the rear of the appliance.
3. Insert the screwdriver into the hole from which you received the screw.
4. Pull out the handle.
20

Publicidad

Tabla de contenido
loading

Tabla de contenido