SEVERIN PC 3751 Instrucciones De Uso página 10

Intermittent operation
This popcorn maker is not designed for
continuous operation. It should not be
operated for more than 5 minutes at a time,
after which it must be switched off for about
10 minutes to cool down.
Thermal safety cut-out
The integral thermal safety cut-out protects
the appliance from overheating, for instance
when extended use causes an overload.
The appliance will automatically resume
operation when allowed to cool down
suffi ciently.
Operation
∙ Place the lid on the main unit.
∙ Fill the measuring cup with a suitable
quantity of popcorn kernels.
∙ Use only plain maize kernels without
additives. Do not put microwave-ready
kernels (or any extra ingredients such
as oil, fat, salt sugar etc) into the heating
unit.
∙ Fill the kernels the through the lid opening
so that they slide down into the heating
insert.
∙ Close the lid opening by placing the
measuring cup with the curved section
facing down into the opening.
∙ Place a container big enough for the
corresponding quantity of popcorn
expected underneath the chute.
∙ Insert the plug into a suitable wall outlet.
∙ Press the on/off switch to turn the
appliance on.
∙ The average processing time for a portion
of popcorn is around 3-5 minutes.
∙ After processing, switch off, take the plug
out of the wall socket, allow the appliance
to cool down and remove any remaining
10
kernels.
Practical hints
∙ Once the popcorn is done, some melted
butter or margarine - seasoned with
herbs if desired - may be poured over the
popcorn.
∙ If a large proportion of the kernels have
not 'popped', the kernels are either too old
or not suitable for making popcorn.
Recipes
Clever, tasty recipe ideas for making
popcorn can be found here
or under
www.severin.de/Service/Rezepte
General care and cleaning
∙ Before cleaning the appliance, ensure it is
disconnected from the power supply and
has cooled down completely.
∙ To avoid the risk of electric shock, do not
clean the appliance with water and do not
immerse it in water.
∙ Do not use abrasives or harsh cleaning
solutions.
∙ The main unit, the measuring cup and the
lid may be wiped clean with a damp cloth
and a mild detergent.