Installing The Software - ADInstruments AD8809 Manual De Usuario

_______________________________________________________________________________
Reception
Cashier
STORE Indoors Stairs
Corridor
Show window,
Packing table
Forefront of show
window
HOSPITAL Sickroom,
Warehouse
Medical Examination
Room
Operating room,
emergency
treatment
SCHOOL Auditorium, Indoor
Gymnasium
Class room
Laboratory, Library,
Drafting, room
Connecting to pc
System requirements:
Windows 98 or windows 2000 (or higher)
Minimum hardware requirements
Pc or notebook, 90MHz Pentium of faster, 32Mb Ram,
At least 5Mb free hard disk space screen resolution
800×600.
Connection
1, Switch the light meter on
2, Plug the other end of the connecting cable to serial interface of the PC (USB).
3, Plug the USB line connecting cable 13.6mm jack plug into the meter socket
5, Start the light meter software.
6, Selecting the COM port 3. note select the 4 COM.
(Note: you should better switch the light meter on before you plug the USB line
connecting cable 13.6mm jack plug into the meter)

Installing the software

z Stare windows
z Close any applications possibly open before installing the "CEM.LINK" software.
z Insert the CD into the CD-drive.
©Copyright Abacanto Digital SA.
200~500 18~47
750~1,000 70~93
150~200 14~18
750~1,500 70~140
1,500~3,000 140~279
100~200 9~18
300~750 28~70
750~1,500 70~140
100~300 9~28
200~750 18~70
500~1,500 47~140
Manual de usuario AD8809
AD Instruments
20