Scan Delete/Add; Priority-Channel Select - Kenwood Nexedge NX-700 Manual De Instrucciones

SCAN DELETE/ADD

You can add and remove zones and/or channels/group IDs to and from your scan
list.
1 Select your desired zone and/or channel/group ID.
2 Press the key programmed as Zone Delete/Add (to add/remove zones) or
Scan Delete/Add (to add/remove channels/group IDs).
• You can also press and hold the key programmed as Scan Delete/Add to add/
remove zones.

PRIORITY-CHANNEL SELECT

If the Priority channel has been set as Operator Selectable by your dealer, you
can reprogram the Priority channels.
1 Select your desired zone and channel/group ID.
2 Press the key programmed as Priority-channel Select.
3 Press / to select "NORMAL", "PRIORITY 1" (
"PRIORITY 1&2" (
4 Press to save the setting and exit.
).
), "PRIORITY 2" ( ), or
13