Safety Symbols - Acc. To Din 4844; Additional Instructions; Anti-Collision Protection - Konig & Meyer Omega-E 18800-000-55 Manual De Instrucciones

2.1.1 Safety symbols – acc. to DIN 4844-2
WARNING Risk of injury due to disregarding safety symbols
Dangers exist as a result of a failure to comply with warning on
the keyboard table and in the instructions.
2.1.2

Additional instructions

The provisions of the accident prevention regulations of the
trade associations and the universally accepted rules of tech-
nology generally apply for all work on the keyboard table.
Ü
2.1.3

Anti-collision protection

The anti-collision protection is not meant for pinch protection
and personal protection! For physical reasons, "soft" obstacles
are difficult or impossible to detect! In the event of a collision
with an obstacle, it is possible for the obstacle to become dam-
aged because the table is moving at nominal speed.
Info about internal anti-collision protection
If the table is traveling upward or downward and encounters
and detects an obstacle, the anti-collision protection prevent
the table from traveling further. If an obstacle is detected, the
further travel of the table is stopped and a movement in re-
verse is initiated (difference of the reverse travel approx. 4cm).
Instructions for use
Start / acceleration phase After a movement begins, obsta-
cles can only be detected after a distance of approx. 2cm is
covered after the nominal speed is reached.
Load: Obstacles are difficult or impossible to detect with an
unloaded table. To ensure more reliable detection, the table
should be loaded evenly with a total weight of at least 20 kg.
Soft obstacles: Soft obstacles are all types of obstacles that
initially yield upon collision, as is the case e.g. with human body
Table-style keyboard stand »Omega-E«
Item no.: 18800-000-55 / 18800-010-55
In addition, please observe:
Applicable mandatory regulations concerning acci-
§
dent prevention
Applicable mandatory regulations at the deployment
§
site
All accepted expert regulations for safety and proper
§
working
Existing environmental protection regulations
§
Other relevant regulations
§
Safety instructions
2
Safety
symbols
Additional
instructions
Anti-collision
protection
10