5-Tone Signaling - Kenwood NX-220 Manual De Instrucciones

5-tone Signaling is enabled or disabled by your dealer. This
function opens the squelch only when the transceiver receives
the 5 tones programmed in your transceiver. Transceivers that
do not transmit the correct tones will not be heard.
SELCALL (SELECTIVE CALLING) (Types I and II Only)
A Selcall is a voice call to a station or group of stations.
■ Transmitting
1 Select your desired zone and channel.
2 Press the key programmed as [Selcall] to enter Selcall
mode.
3 Press the <B or C> key to select the station you want to
call.
• On type I models, you can directly enter the station ID.
4 Press the key programmed as [Call 1] to [Call 6] and
begin your conversation.
Note: Additionally, you can also use the keys programmed as
[Digit 1x Down], [Digit 1x Up], [Digit 10x Down], and [Digit
10x Up] to adjust the Selcall number. [Digit 1x Up/Down]
increases/decreases the Selcall number by 1 each time the
key is pressed. [Digit 10x Up/Down] increases/decreases the
Selcall number by 10 each time the key is pressed.
■ Receiving
When you receive a call containing the correct tones, the
transceiver will enter Selcall mode. An alert tone will sound
and the calling station's ID appeard on the display. Press
any key to return to normal operation.
20

5-TONE SIGNALING