Notes On Hdmi Connections; Saving Power Consumption; Saving Power In Standby Mode - Sony HT-S350 Manual De Instrucciones

Ocultar thumbs Ver también para HT-S350:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Notes on HDMI
Connections
• Use an HDMI-authorized cable.
• We recommend using a Sony High
Speed HDMI Cable with Ethernet with
the Cable Type Logo.
• We do not recommend using an
HDMI-DVI conversion cable.
• Audio signals (sampling frequency, bit
length, etc.) transmitted from an HDMI
jack may be suppressed by the
connected device.
Saving Power
Consumption
To use the Sound Bar while saving
power consumption, change the
following settings.
Turn the Sound Bar Off by
Detecting the Using State
When you set the auto standby function
to on, the Sound Bar enters standby
mode automatically when you do not
operate the Sound Bar for about 20
minutes and the Sound Bar is not
receiving an input signal.
Press and hold INDICATORS for 5
seconds to set the function to on or
off.
Auto standby on
The BLUETOOTH indicator flashes twice.
Auto standby off
The BLUETOOTH indicator flashes once.
Saving Power in Standby
Mode
To save power consumption during the
standby mode, set the BLUETOOTH
standby mode (page 25) and Control for
HDMI function (page 27) to off.
The default settings for them are on.
29
US

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido