Using The Various Functions; Performing The Wireless Connection Of The Subwoofer (Secure Link) - Sony HT-S350 Manual De Instrucciones

Ocultar thumbs Ver también para HT-S350:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Using the Various Functions

Performing the Wireless
Connection of the
Subwoofer (SECURE LINK)
You can specify the wireless connection
to link the Bar Speaker to the subwoofer
using the Secure Link function. We
recommend to perform the Secure Link
function to prevent interference if you
use multiple same products or your
neighbors use same products.
Status indicator
26
US
LINK
SECURE LINK
1
Press LINK on the rear of the
subwoofer.
The status indicator of the
subwoofer flashes in orange.
Proceed to the next step within 2
minutes.
2
Press and hold SECURE LINK on
the remote control for 5 seconds.
The link setting starts.
The MULTI CH and TV indicators
flash twice, then the indicators flash
alternately.
3
Make sure that the MULTI CH and
TV indicators stop flashing and the
status indicator of the subwoofer
lights in orange.
A connection between the Bar
Speaker and subwoofer has been
established.
If it fails, the MULTI CH and TV
indicators light for 5 seconds. In this
case, perform the Secure Link
operation again.
To deactivate the Secure Link
function
Press and hold SECURE LINK for 5
seconds.
The MULTI CH indicator flashes twice.

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido