Replacing The Battery; Important - EGAmaster EGAtronik 51259 Manual De Instrucciones

Multímetro digital para automóviles
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Warning!
To avoid false readings, which could lead to possible electric shock or personal injury, replace
the battery as soon as the battery indicator
To replace the Meter's battery:
1. Turn the Meter power off and remove all connections from the terminals.
2. Take the Meter out from the holster.
3. Remove the screw from the battery compartment and open the battery compartment.
4. Take out the battery and replace with a new 9V battery (NEDA1604, 6F22 or 006P).
5. Rejoin the battery compartment and the case bottom, and reinstall the screw and the holster.

IMPORTANT!

The maker will not take responsibility for damage or malfunction as a result of the device being
incorrectly used or, applied for a purpose for whith it was not intended.
According to Waste Electrical and Electronic Equipment directive (WEEE), these ones must
be collected and arranged separately. If you have to throw them out, please, do not use the usual
rubbish. Please, contact your distributor for free recycling.
The maker guarantees to the device owner 12 months against any manufacture defect.
This guarantee do not cover the parts wich are consumables.
Note: to apply the guarantee its necesary to send the "GUARANTEE CERTIFICATE" duly filled
within one week after purchased the machine to the maker.
C. REPLACING THE BATTERY (SEE FIGURE 15)
(figure 15)
appears.
NOTES
GUARANTEE
49

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido