Connecting Other Portable
Audio Device
1
Turn off the portable audio device.
2
Turn down the volume on the unit.
3
Connect the portable audio device to the
AUX input jack (stereo mini jack) on the
unit with a connecting cord (not
supplied)*.
* Be sure to use a straight type plug.
4
Press SRC to select [AUX].
To match the volume level of the connected
device to other sources
Start playback of the portable audio device at a
moderate volume, and set your usual listening
volume on the unit.
Press MENU, then select [SOUND] [SET AUX VOL]
(page 14).
Listening to the DAB/DAB+ Radio
Listening to the Radio
To listen to the DAB/DAB+ radio, press SRC to select
[DAB / DAB+].
When the DAB source is selected for the first time
after replacing the car battery or changing the
connections, the auto tune starts automatically.
Allow the auto tune to finish. (If interrupted, the
auto tune will start again the next time you select
the DAB source.) If no DAB station is stored by the
auto tune, perform an auto tune manually (page 8).
Tip
Set [SET ANT-PWR] to [ON] (default) or [OFF] depending
on the type of DAB antenna (aerial) (page 14).
Receiving DAB
DAB (Digital Audio Broadcasting) is a transmission
system on terrestrial networks. DAB stations bundle
radio programs ("stations") into a station group,
and each station contains one or more
components. The same station can sometimes be
received on different frequencies.
Searching for station by station group
Before operation, set [SEEK BY] to [STATION GP] for
searching by station group (page 13).
1
Press MODE to select [DB1], [DB2] or
[DB3].
2
Press / (SEEK –/+) to search for a
station within a station group; press and
hold / (SEEK –/+) to search for
different station groups.
Scanning stops when the unit receives a
station/station group. Search until the desired
station is received.
7
GB