Vermeiren Sedna Manual De Instrucciones página 17

3.1.3 Armrests (if applied)
Your scooter may be delivered with next parts.
Rotatable seat and armrests
Your specialist dealer installs the armrests according to a standard width. It is possible
to have the space between the armrests adjusted.
Position
The armrests can be turned backwards to make it easier to sit down on the seat.
1. Press the small button (38) next to the reflector and turn the armrest towards the desired
position (up or down).
2. Release the button and check that the armrest is secured.
Height
1. Sit down on the seat.
2. Turn armrest (34) up.
3. Press on height adjustment (35) on the side of the armrest and slide the armrest to the
desired height.
4. Release the button and check that the armrest is secured.
5. Repeat this for the other armrest.
3.1.4 Rotatable seat (if applied)
The numbers in parenthesis can be found in figure 5.
Turn the seat to the side
1. Stand next to the scooter.
2. Pull lever (37) up and turn seat (36) towards you.
3. Release the lever and check if the seat is locked.
4. Please sit down on the seat, with your lower back against the back rest.
Turn the seat to the front
1. While sitting on your scooter, pull lever (37) up and turn yourself with the seat to the front.
2. Release the lever and check if the seat is locked.
34. Armrest (2x)
35. Height
armrest
36. Rotatable seat
37. Operating lever to turn the
seat
38. Position
armrest
EN - 13
Sedna
2019-02
Using your scooter
adjustment of
adjustment of
EN
NL