LD Systems MAUI 44 G2 Manual De Usuario página 8

PLEASE NOTE:
• Only audio signals from a paired Bluetooth playback device can be transmitted via the TWS stereo link function. Audio signals at the line input will
not be transmitted via TWS.
• When the MAUI 44 G2 systems have been switched off and back on, the Bluetooth playback device will pair automatically and the systems will
connect with each other automatically via TWS.
• The maximum number of paired Bluetooth devices is 8 (including paired MAUI 44 G2 systems). If another device is paired, the last entry from the
list of stored devices will be deleted. A maximum of one Bluetooth playback device and one MAUI 44 G2 system can be connected simultaneously
with the MAUI 44 G2 master unit to create a stereo extension.
Bluetooth and TWS status
Bluetooth and stereo link status
Pair Bluetooth unit with playback device
Bluetooth unit is paired and connected only with playback device
Pair Bluetooth unit with playback device (as stereo link – master)
Pair slave unit – stereo link to master unit
Slave unit – stereo link paired with master unit
Slave unit – slave unit paired but not connected
Pair master unit - stereo link pairing without Bluetooth connection to playback device
Master unit connected to slave unit but without Bluetooth connection to playback device
Master unit – stereo link pairing with Bluetooth connection to playback device
Master unit connected to slave unit with Bluetooth connection to playback device
Neither Bluetooth nor stereo link connection
CARDIOID SUBWOOFER ON / OFF
9
Note: The cardioid subwoofer feature is only available when the loudspeaker columns are not connected to the MAUI 44 G2 subwoofer.
MAIN / SLAVE operation: The optionally available MAUI 44 G2 SUB subwoofer extension can be used with the MAUI 44 G2 PA system in two different ways.
A. The subwoofer extension is positioned in the same orientation as the subwoofer of the MAUI 44 G2 PA system. In this case, the cardioid preset on
the subwoofer extension must be disabled (CARDIOID OFF). Press and hold the CARDIOID button for about 2 seconds to change status.
A. The subwoofer extension is positioned 180° to the subwoofer of the MAUI 44 G2 PA system. In this case, the cardioid preset must be enabled
(CARDIOID ON). Press and hold the CARDIOID button for about 2 seconds to change status. The cardioid set up results in more prominent bass
dispersion at the front and a clearer stage sound at the rear due to extensive low-frequency cancellation.
10
8
A
11
Bluetooth LED
Flashes (3 Hz)
on permanently
Flashes (3 Hz)
Flashes (0,3 Hz)
Flashes (0.3 Hz)
Flashes (0.3 Hz)
off
off
on permanently
on permanently
off
B
STEREO LINK LED
off
off
on permanently
Flashes (3 Hz)
on permanently
off
Flashes (3 Hz)
on permanently
Flashes (3 Hz)
on permanently
off