System Requirements; Technical Specifications - Sveon SNT1020 Manual De Usuario

1. Welcome
Thanks for choosing SNT1020, a WiFi USB N/300Mbps adapter from Sveon to connect your laptop or computer through
a network in a wireless mode. This adapter includes two RP-SMA female antennas which you can move or replace to get
a better coverage.
Through this user guide we will show you how to connect and use the device to get the best performance.
2. Features
The Wireless-N technology* offers a high speed and maximum coverage in Wireless N networks but also allows you to
connect your devices through a wireless network G, B or even A. In addition, thanks to this adapter with double RP-SMA
antennas and its chipset Ralink 3070, you can get a higher speed and coverage than other "N" devices.
Connect your PC or laptop in a very fast and easy way, thanks to Ralink advanced software and thanks to WPA2 security.
The device supports the data encryptation WEP/64/128, WPA, WPA2 and WPS.
SNT1020 device includes WPS (WiFi Protected Setup) system. This system makes easier the connection between
devices through the network (with WPA/WPA2 data encryptation).
* The performance of Wireless N Tecnology depends on the usage environment.

3. System requirements

- PC or laptop with an available USB 2.0 port*
- OS: XP with Service Pack 2, 2000, Vista, W7, Linux, Mac (10.6)
- CD/DVD ROM unit
- Processor 300MHZ with 64mb of RAM.
- Wireless Modem/Router 802.11b/g o 802.11n
* If you use an USB 1.1 connection the speed and signal level may be reduced.
4. Technical Specifications
- Modulation Type: OFDM/CCK/16-QAM/64-QAM
- Standard: IEEE 802.11n, 802.11g, IEEE802.11b
- Interface: USB 2.0
- Frequency: 2.4 ~ 2.4835
- Spread Spectrum: DSSS
- Transmission distance: 100m (indoor), 300m (outdoor, it depends on the usage environment)
- Data Rate:
11n: 300 /150 / 108 / 81 / 54 / 27 Mbps
11b: 1, 2, 5.5, 11 Mbps
11g: 6, 9, 12, 24, 36, 48, 54 Mbps
135, 121.5, 108, 81, 54, 40.5, 27, 13.5 Mbps
130, 117, 104, 78, 52, 39, 26, 13 Mbps
65, 58.5, 52, 39, 26, 19.5, 13, 6.5 Mbps
- Transmit power: 15 dBm, 300 Mbps
- Data secirotu: 64,128, 152 WEP, WPA/WPA2, WPA-PSK/WPA2-PSK (TKIP/AES)
- Indicator LED
- Receiver sensitivity:
-68 dBm 10%: 300M, 150M, 130M, 108M, 54M
-85 dBm 10%: 11M
-88 dBm 10%: 6M
-90 dBm 10%: 1M
- Environment:
· Operating Temperature: 0ºC~40ºC
· Storage Temperature: -40ºC ~ 70ºC
· Relative Humidity: 10% ~ 90% (non-condensing)
· Storage Humidity: 5% ~ 95% (non-condensing)
5. Content
- SNT1020 adaptor with RP-SMA connector (female connector / Male pin).
- Double 2dBi omnidirectional antennas with RP-SMA connector
- CD Driver
- Digital user guide (included in CD Driver)
- Guarantee card
- Quick Installation Guide
6. Hardware
1. SNT1020 adaptor
2. USB port
3 Status indicator LED
4. Double RP-SMA antenna
5. WPS button
6. RP-SMA antenna connector
SNT1020 User Manual
Index
1. Welcome
2. Features
3. System requirements
4. Technical specifications
5. Content
6. Hardware
7. Driver installation on PC
7.1 Windows XP/Vista/W7
7.2 Ubuntu (Kernel 2.6.31)
7.3 Mac (Snow Leopard 10.6.2)
8. Device connectiontivo
8.1 RaUI setup
9. Network connection
9.1 Network connection using WZC
9.2 Network connection using RaUI utility
9.3 Network connection in AP-Mode (Ad Hoc)
9.4 Network connection with WPS
10. RaUI software control panel
10.1 Network
10.2 Profile
10.3 Advance
10.4 Statistics
10.5 WMM
10.6 WPS
10.7 SSO
10.8 CCX
10.9 Radio On/Off
10.10 About
11. MAC address specifications
English 25