Sveon SNT1020 Manual De Usuario página 36

Event Log
The "Event log" section allows you to check the date, time, MAC
and the status of the connecte device.
Statistics
This option displays the transmit and receive data information of our
AP.
About
Displays the information and SNT1020 adapter version.
9.4 Network connection with WPS (WiFi Protected Setup)
The WPS system (WiFi Protected Setup) is a standard which makes easier the connection between devices through a net-
work in a safely way. If you want to connect the device to a network using WPS you need a Modem or Router with this
function available. The WPS system uses the following logo:
The SNT1020 adaptor includes two basic methods for WPS usage: PIN Mode (Personal Identification Number) or PBC
Mode (Push Button Configuration).
PIN Mode (Personal Identification Number)
If you are going to use the PIN mode, please confirm if your Modem or router works as "Registered" or "Enrollee".
When your Modem or router works as "Registered", you must enter "Add Enrollee PIN Code" in "WPS Config" secion of
your Modem or router. This "Enrollee PIN Code" must be provided by the "Enrollee code" of RaUI Ralink software.
Router example:
SNT1020 User Manual
Index
1. Welcome
2. Features
3. System requirements
4. Technical specifications
5. Content
6. Hardware
7. Driver installation on PC
7.1 Windows XP/Vista/W7
7.2 Ubuntu (Kernel 2.6.31)
7.3 Mac (Snow Leopard 10.6.2)
8. Device connectiontivo
8.1 RaUI setup
9. Network connection
9.1 Network connection using WZC
9.2 Network connection using RaUI utility
9.3 Network connection in AP-Mode (Ad Hoc)
9.4 Network connection with WPS
10. RaUI software control panel
10.1 Network
10.2 Profile
10.3 Advance
10.4 Statistics
10.5 WMM
10.6 WPS
10.7 SSO
10.8 CCX
10.9 Radio On/Off
10.10 About
11. MAC address specifications
English 36