Sveon SNT1020 Manual De Usuario página 43

WMM Power save enable
- Active WMM-Power Save Enable
- Select the category you want to enable (AC_BKm, AC_BE, AC_VI, AC_VO)
Direct Link Setup Enable
- Active Direct Link Setup Enable
- Enter the Mac address of the other client in the Direct Link fields.
- Click on "Apply"
Note: The other client must be connected to the same modem or router which supports DLS function.
10.6 WPS
The WPS (WiFi Protected Setup) option allows you to make easier the security setup of your network. The adaptor
SNT1020 supports this option by using PIN mode or PBC mode.
- WPS AP List: Displays the information of the router or modems around. This information includes SSID, BSSID, chan-
nel and security.
- Rescan: Updates the available network list.
- Information: Displays the WPS information of the selected network. This information includes: Authentication type,
Encryption type and device password.
- PIN CODE: Code with eight numbers. Enter the PIN in "Register" option. Each wireless adapter has its own PIN in "En-
rollee".
- Config Mode: Uses our "Enrollee" inner PIN or an external PIN in "Register".
- WPS Profile List: Displays all the information obtained in "Register". The list includes SSID, MAC address, Authentica-
tion and encryption type.
- Detail: Displays information about the security setup.
- Connect: Select to connect to the selected network.
- Rotate: Select to rotate between the credentials.
- Disconnect: Stop WPS action and disconnect the current link.
- Export Profile: Exports the profile to "Profile".
- Delete: Delete a profile.
PIN: Starts to register using the PIN setup mode.
PBC: Starts to register using the WPS mode.
Note. When you click on Pin or PBC, do not rescan during around two minutes. If you want to cancel this setup, resept
PIN/PBC or press "Click" in "Disconnect" to stop WPS connection.
10.7 SSO
This section allows you to setup the profile start in the OS start process.
SNT1020 User Manual
Index
1. Welcome
2. Features
3. System requirements
4. Technical specifications
5. Content
6. Hardware
7. Driver installation on PC
7.1 Windows XP/Vista/W7
7.2 Ubuntu (Kernel 2.6.31)
7.3 Mac (Snow Leopard 10.6.2)
8. Device connectiontivo
8.1 RaUI setup
9. Network connection
9.1 Network connection using WZC
9.2 Network connection using RaUI utility
9.3 Network connection in AP-Mode (Ad Hoc)
9.4 Network connection with WPS
10. RaUI software control panel
10.1 Network
10.2 Profile
10.3 Advance
10.4 Statistics
10.5 WMM
10.6 WPS
10.7 SSO
10.8 CCX
10.9 Radio On/Off
10.10 About
11. MAC address specifications
English 43