If you want to use RaUI application to setup your wireless network, right click over the RaUI icon again.
9. Network connection
9.1 Network connection using WZC (Windows Zero Connection)
- If you decided to use WZC to setup your wireless network connection, the following picture is shown:
- Press over the icon "1" to see
the available wireless networks.
- The following picture appears:
If your wireless network is protected
using a password, the following icon ap-
pears.
Select this network to connect.
- Click on "Connect".
SNT1020 User Manual
Index
1. Welcome
2. Features
3. System requirements
4. Technical specifications
5. Content
6. Hardware
7. Driver installation on PC
7.1 Windows XP/Vista/W7
7.2 Ubuntu (Kernel 2.6.31)
7.3 Mac (Snow Leopard 10.6.2)
8. Device connectiontivo
8.1 RaUI setup
9. Network connection
9.1 Network connection using WZC
9.2 Network connection using RaUI utility
9.3 Network connection in AP-Mode (Ad Hoc)
9.4 Network connection with WPS
10. RaUI software control panel
10.1 Network
10.2 Profile
10.3 Advance
10.4 Statistics
10.5 WMM
10.6 WPS
10.7 SSO
10.8 CCX
10.9 Radio On/Off
10.10 About
11. MAC address specifications
English
32