Initial Settings; Radio - Pioneer MVH-S300BT Manual De Instrucciones

Receptor de medios digitales
Ocultar thumbs Ver también para MVH-S300BT:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Menu Item
Description
LANGUAGE
Select the language to display the text information from
a compressed audio file.
[ENG](English),
[ESP](Spanish),
[FRA] (Canadian
French)
CLOCK SET
Set the clock.
1 Turn the M.C. dial to adjust the hour, then press to
confirm.
The indicator moves to the minute setting
automatically.
2 Turn the M.C. dial to adjust the minute, then press to
confirm.
2
[QUIT :YES] appears when all the settings have been made.
To return to the first item of the setup menu, turn the M.C. dial to select
[QUIT :NO], then press to confirm.
3
Press the M.C. dial to confirm the settings.
NOTE
These settings can be made at any time from the SYSTEM settings (page 20).
Canceling the demonstration display (DEMO
OFF)
1
Press the M.C. dial to display the main menu.
2
Turn the M.C. dial to select [SYSTEM], then press to confirm.
3
Turn the M.C. dial to select [DEMO OFF], then press to confirm.
4
Turn the M.C. dial to select [YES], then press to confirm.

INITIAL settings

1
Press and hold SRC/OFF until the unit turns off.
2
Press the M.C. dial to display the main menu.
3
Turn the M.C. dial to select [INITIAL], then press to confirm.
4
Turn the M.C. dial to select an option, then press to confirm.
Menu Item
Description
SP-P/O MODE
Select when there is a full-range speaker connected to
the rear speaker output leads and there is a subwoofer
[REAR/SUB.W]
connected to the RCA output.
[SUB.W/SUB.W]
Select when there is a passive subwoofer connected
directly to the rear speaker output leads and there is a
subwoofer connected to the RCA output.
[REAR/REAR]
Select when there are full-range speakers connected to
the rear speaker output leads and RCA output. If there is
a full-range speaker connected to the rear speaker
output leads, and the RCA output is not used, you may
select either [REAR/SUB.W] or [REAR/REAR].
SYSTEM UPDATE
Select [SYSTEM INFO] to confirm the latest system
information on the unit.
[SYSTEM INFO],
Select [S/W UPDATE] to update the unit to the latest
[S/W UPDATE]
software and initialize the unit settings. For details on the
latest software and updating, visit our website.
SYSTEM RESET
Select [YES] to initialize the unit settings. The unit will be
restarted automatically.
[YES], [NO]

Radio

The tuner frequencies on this unit are allocated for use in North America. Use
in other areas may result in poor reception.
7
En

Hide quick links:

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Mvh-s301bt

Tabla de contenido